Remote Control; On/Off Button - Tangent Ampster BT II Mode D'emploi

Remote control:

1. On/Off Button

2. Optical Source
3. Volume +/-
4. Previous/Next
5. Line In Source
6. Play/Pause
(BT/CD mode)
7. AUX Source
8. Preset 1-6
9. Bluetooth Source
1
(CD)
(BT/CD mode)
(TUNER)
9
2
7
4
8
Connect:
1. Connect the power cord to the back of the
amplifier then connect it to a wall outlet.
2. Connect your devices to the desired input.
3. Turn the power button to the On position,
after two seconds the unit will enter working
3 status and the input indicator will lit up.
4. Press the Bluetooth, OPT, LINE or AUX button
on the remote or the volume knob to choose
the desired audio source.
Control the playback via the remote control by
pressing the buttons.
5
Note: The amplifier will shut off automatically
if the temperature exceeds 85°C, to indicate
this the Power indicator will turn orange. The
6 amplifier will re-start automatically when the
temperature has dropped below 60±10°C.
Bluetooth Pairing:
1. Press the Bluetooth on the remote (or push the
selector button) to activate the Bluetooth source.
2. Activate Bluetooth on your phone/tablet and
start searching for new Bluetooth devices.
3. When your phone/tablet finds the Tangent
Ampster BT II, choose this unit and begin pairing up.
(You can force the Ampster into pairing mode, with long press on BT)
(UK)