Before First Use; Assembling & Using The Jar - Ninja Ultra Prep PS100 Série Guide D'utilisation

BEFORE FIRST USE

NOTE: Be careful not
1 Remove all packaging material and labels from the
appliance. Separate all parts.
to over-process. Use
2 Wash the jar, splash guard lid, and blades in warm, soapy
repeated short pulses
water. When washing the blades, use a dishwashing utensil
until your desired
with a handle to avoid direct hand contact with blades.
consistency is reached.
3 Handle the blades with care to avoid contact with sharp
edges. Rinse and air-dry thoroughly.
4 The jar, splash guard lid, and blades are all dishwasher safe.
It is recommended that the jar, splash guard lid, and blades
be placed on the top rack. Ensure blades are removed
from the jar before placing in the dishwasher.
5 Wipe the Power Pod clean with a damp cloth.
8
ASSEMBLING & USING THE JAR
Shaft
Fig. 1
1 Review important safeguards on pages
2-3 before proceeding to step 2.
2 Place the jar on a clean, dry, level surface.
3 Holding the blade by the shaft, carefully
lower it onto the spindle pin inside the
jar (Fig. 1).
4 Add the ingredients to be processed
into the jar.
5 Place splash guard lid on the jar (Fig. 2).
6 Place the power pod on top of the
splash guard lid, making sure it is securely
in place (Fig. 3).
7 To start the appliance, plug the power
cord into an electrical outlet, securely hold
the power pod, and press the Power Pod
control button located on the top of the
power pod. Continue to hold jar and power
pod firmly while operating (Fig. 4).
Fig. 4
Fig. 2
Fig. 3
8 To stop the appliance, stop pressing the
Power Pod control button.
9 Make sure the blade has stopped
completely before removing the power pod.
10 If ingredients stick to the sides of the jar,
stop the appliance, remove the power pod
and splash guard lid, then use a spatula to
scrape ingredients down toward the blades.
11 To remove ingredients with a thinner
consistency, pour them through the
spout on the splash guard lid. To remove
contents with thicker consistencies, first
take off the splash guard lid. Carefully
remove the blade and set it aside before
emptying contents from jar.
ninjakitchen.com
9