KEUCO iLook move 17612 019050 Instructions D'utilisation page 3

Read all instructions before using or installing this product.
Symbols and their meaning
Caution! Warning of personal injury or material
damage
Caution! Warning of electric shock.
Caution! Warning of water damage.
Note, tip or reference
Correct assembly/functional test
Incorrect assembly
On/off switch
Light colour - daylight white (cool white)
Light colour warm white
Technical data
– Supply voltage:
– Max. power consumption:
Prod. No.:
- 17612 XX9050
- 17613 XX9050
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
– Magnifi cation factor (mirror):
120V AC 50Hz/60Hz
Light
3.5 W
5.3 W
NEMA 1
41° – 104 F
-40° – 158° F
2700 – 6500 Kelvin
x5
Mounting dimensions, see page 10.
Before installation check whether the fastening mate-
rials included are suitable for the anchoring base. The
fastening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
Use a 20 cubic inches electrical outlet box for rough
installation (e. g. Carlon B120R).
Installation
• Mark the wall bracket position, see fi gure 1 on
page 11.
• Mark the escutcheon position, see fi gure 2.
• Pre-drill holes, see fi gure 3.
• Mount the wall bracket to the wall, see fi gure 4.
• Hang the cosmetic mirror on the wall from above,
see fi gure 5 on page 12.
• Pull on cable protection, see fi gure 6.
• Screw sensor to escutcheon, see fi gure 7.
• Connect supply unit to sensor, see fi gure 8.
• Cover sensor with display, see fi gure 9 on page 13.
• Connect supply unit to power supply, see
fi gure 10.
• Insert supply unit, see fi gure 11 on page 14.
• Screw escutcheon complete to the wall and cover
with caps, see fi gure 12.
• Connect the cosmetic mirror to the power supply,
see fi gure 13 on page 14.
US
L
= BLACK
N
= WHITE
3