Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Personal Safety
•
Stay alert, watch what you are doing, and use common sense when operating a
power tool. DO NOT use tool while tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
injury.
•
Dress properly. Do not wear loose clothing or jewelry. Pull back long hair and keep
your clothing and gloves away from tool to avoid getting caught in moving parts.
•
Avoid accidental starting by keeping fingers away from switch when carrying plugged
in polisher. Be sure the power switch is in the "I" (off) position before plugging in.
Disconnect tool when not in use or when servicing with replacement parts.
•
Remove adjusting keys or switches before turning the tool on. A wrench or key that is
left attached to a rotating part of the tool may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
•
Use safety equipment such as eye protection and a dust mask.
4. Tool Use and Care
•
Do not use force with the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
•
Do not use tool if the switch does not turn it on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventative safety measures reduce the risk of
starting the tool accidentally.
•
Store idle tool out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
•
Maintain tools with care. Properly maintained tools are less likely to bind and are
easier to control.
•
Check for misalignment or binding of moving parts, breakage of parts and other
conditions that may affect the tools operation. If damaged, have the tool serviced
before using. Poorly maintained tools cause many accidents.
•
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
5. Service
•
Only qualified repair personnel must perform tool service. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
•
When servicing a tool, use only identical replacement parts. Follow instructions in the
"Maintenance" section of this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or injury.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2015 Wagan Corporation. All Rights Reserved.
2
Publicité
Table des Matières
