Putting Into Operation - Kränzle INOX 300 Manuel D'utilisation Et Liste De Pièces

Putting into operation

Attach Round Cleaner INOX to the safety trigger gun
Instead of the cleaning lance please assemble Round Cleaner INOX at the trigger
gun with safety catch of your high-pressure cleaner.
Always wear suitable protective clothing and gloves when working
with the Round Cleaner INOX.
The Kränzle Round Cleaner INOX can be operated with hot water of
max. 60 °C. Attention! Danger of scalding! Only touch metal parts
wearing gauntlets. Make sure to wear protective clothng!
No other persons or animals may be in the working area/near the
cleaning head.
Ensure a secure stand (danger of recoil) and hold the safety trigger gun
firmly with the extension tube or handle.
Accessories may only be connected to a Kränzle-approved trigger gun
with safety catch.
Attach Round Cleaner INOX with threaded screw connection
to the safety trigger gun
24
1. Round Cleaner INOX on to safety
trigger gun.
2. Screw together Round Cleaner INOX
and safety trigger gun pressure tightly.
Putting into operation
Attach Round Cleaner INOX with plug-in system D12
to the safety trigger gun
During operation the plug coupling must not be actuated/ touched!
High risk of injury!
Prior to insertion, check plug coupling connection of lance for
cleanliness (sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
1. First pull back the retaining sleeve
of the safety trigger gun, then insert
plug-in system D12 into the plug
coupling sconnection of the safety
trigger gun.
2. After insertion of the lance, release
retaining sleeve and make sure that
the lance is in a secure position.
Grease quick release nipple regularly
using acid-free grease.
EN
25