Installing A Battery - Enerwatt EWGR-31 Guide D'utilisation

INSTALLING A BATTERY

1. Open the lid of the Battery Box.
2. Place the battery in the Battery Box.
3. Insert the divider to prevent any shifting of the battery
inside the Battery Box.
4. Attach the eyelets from the Battery Box lid to the corresponding
positive and negative terminals on the battery. Fasten the bolts firmly
to prevent them from loosening due to vibration.
5. Replace the Battery Box lid, making sure that it is evenly
and completely shut.
6. With the lid closed and the terminals connected, switch the battery to on using the on/off switch and test
the voltage with the voltmeter.
7. If the voltmeter lights up and displays the battery's voltage, the lid can be secured.
8. To secure the lid, thread the strap around the box and through the two plastic buckles.
Fasten and secure at the top of the unit.
9. You are now free to plug in your devices to power them with your battery.
Circuit breaker switch
USB Socket
Power sockets
To Accessory or Equipment
Voltage meter
BATTERY
Positive (+)
terminal
EWGR-31
USER'S MANUAL
Negative (-)
terminal
5