Assembly Parts; Assembly / Storage; Use; Accessories - Eureka 60 Série Guide Du Propriétaire

➀
➀
Power Switch
1
➂
Cleaning accessories
➊
6
➁
FIG. 1
➁
Power Switch
1
FIG. 2
Brushroll
➁
Riser Visor nozzle
tm
On
Cover
Suction
Only
Off
Open
Cup
➋
FIG. 3
ENGLISH

aSSemBlY PaRtS

➀ Vacuum Cleaner
Crevice Tool
➁

aSSemBlY / StoRaGe

➀ Wrap electrical cord around the base of the cleaner. Secure electrical plug
to cord to prevent cord from unwinding.
Store crevice tool inside the base of the cleaner.
➁
How to USe
(Fig. 3)
CaUtIon: moving parts. make sure the power switch is in off (0) position
before plugging in.
Power Switch
➀
Brushroll
Brushroll
on
On
Suction
Suction
Only
only
off
Off
open Cup
Open
Cup
Riser Visor nozzle Cover
➁
tm
The Riser Visor nozzle features a rotating cover over the brush roll. When
the cover is in the normal position, the brush roll action is toward the bot-
tom side of the nozzle to clean flat areas such as stair steps or upholstery.
Twist the cover downward to rotate the cover down exposing the front of
the brush roll for cleaning vertical surfaces, e.g. stair risers, furniture backs.
CaUtIon: to prevent injury, turn off the power switch and unplug
cleaner before rotating the Riser Visor nozzle.
Cleaning accessories
➂
CaUtIon: moving brush roll, power switch should be in suction only
position when using hose.
➊ Pull the hose from hose adaptor on cleaner.
Pull the crevice tool out of the base of the cleaner.
➋
➌ Place the crevice tool on the end of the hose.
When cleaning is completed, store crevice tool back in the base of
➍
the cleaner and replace the hose in the hose adapter on the cleaner.
(Fig. 1)
(Fig. 2)