Standby Mode; Replacing The Outer Ring - Alber Twio mobility plus Mode D'emploi

4. STANDBY MODE

If the system is switched off using the On/Off switch on the wheel:
The connection to the smartphone is disconnected and the
wheel cannot be switched on via the smartphone.
The system does not consume any power.
If the system is switched off via the smartphone:
The system goes into standby mode.
The connection to the smartphone is disconnected, but can be re-
established at any time.
The system consumes a small amount of power. The maximum
standby time is displayed, depending on the available battery
capacity. If this time is exceeded, the system switches off and
can only be switched on again via the On/Off switch on the wheel.
24

5. REPLACING THE OUTER RING

Find one of the three recesses
at the outer edge of the cover
(between ring and cover).
Grip the edge of the ring and
press your thumbnail into the
notch. Pull outwards at the same
time.
25