Hammam - glass 1989 CHILLOUT Notice D'utilisation

HAMMAM

LIGHTING ICON 3 (ON/OFF)
When hammam function is not installed,
icon 3 is not illuminated.
Below is a table on the other types of
lighting of icon 3 and their meaning.
LIGHT MEANING
WHITE Hammam function off
YELLOW Hammam function switched
on / in preparation
GREEN Hammam function on /
active
RED Alarm
VIOLET Descaling function in
progress
HAMMAM FUNCTION SETTING
Select icon 3 to quickly activate the
hammam function.
Select icon 7 to access the menu.
TEMPERATURE SETTINGS
The hammam
can be set from
The display shows the room temperature
indicated by the number at the top, while
the number at the bottom indicates the
set temperature of the hammam.
SET
To change the temperature, select icon
7. Use icons 4 and 5 illuminated with
intermittent BLUE light to set the desired
temperature. Select icon 6 to exit the
setting.
sauna
hours:
the
In fact, when the hammam function is off ,
the following data "00:00" is displayed.
The duration of the hammam can be set
from 1 to 12 hours.
the icon 7. Use icon 4 and 5 illuminated
with intermittent BLUE light to set the
desired duration.
temperature
35°C to 60°C.
following icon appears on the display.
020
045
function on or off . When the descaling
function is on, icon 3 is illuminated with
PURPLE light.
5
HAMMAM DURATION SETTINGS
The remaining
function
minutes (HH:
hammam function
00:40
To set the duration, select the icon 4 and
Select icon 6 to exit the setting.
DESCALE SYSTEM
Repeatedly touch the icon 4 until the
Select icon 7 to switch the descaling
duration of the
is displayed in
MM), when
is active.
40
EN