Inserting Batteries; Taking Photos - Teknofun BARBAPAPA Manuel D'utilisation

2.2 Inserting batteries

Open the camera's battery compartment cover and insert 2 new AAA alkaline
battery according to its polarity shown, then close it and press the Power/Menu button
to power on the camera.
After powered on, if you want to make changes to the camera's default settings,
please read the instructions of this manual.
Note: Unload the batteries will make the photos saved to the camera memory
LOST, so do download the photos saved accordingly

2.3 Taking photos

After powered on, the camera is ready to take photos, just press the Shutter button,
a distinct beep can be heard and a photo is taken. Automatically the number
displayed on the screen wil count by one.
Two quick beeps indicate:
1. there is not enough light to take a picture.
2. The memory is full,
Do not move the camera until you hear the beep. Moving the camera while
taking the picture will cause the photo to blur.
Page 7 of 17