Rs-232 Output; A/D Update Rate; Display Condition At Zero - Gram SC2 Manuel D'utilisation

Factory default: ACCU 0 0
UF-6 RS-232 output
1. Use the 0 – 4 keys to enter RS-232 output formats.
2. Press the
232 0 0
A B
A: Baud rate setup
0: 1200 1: 2400
B: Output mode setup
0: RS-232 output disable
UF-7 A/D update rate
1. Use the 0 -2 keys to enter ADC speed.
2. Press the
Speed 0: low speed
Speed 1: standard speed
Speed 2: Hight speed
3. Press the
4. Press the
Factory default: 0
UF-8 Display condition at zero
1. Use the 0 – 5 keys to enter.
2. Press the
ZP 1: 1 division not to display at zero
ZP 2: 2 division not to display at zero
ZP 3: 3 division not to display at zero
ZP 4: 4 division not to display at zero
key to confirm:
2: 4800
1: Manual output (formats 2)
key to confirm:
key to confirm.
to exit.
to confirm
3: 9600 4: 19200
10