Table des Matières
Publicité
Certificate No:
Date of Issue:
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
Subject and Type
See Annex
Description
The ultrasonic sensor is used for contactless capture of objects. The ultrasonic diffuse mode sensor detects all objects that echo back
ultrasonic waves. The sensor consists of a stainless steel enclosure with an external thread in size M18 or M30. For adjusting the
measuring range the sensor is optionally equipped with teach buttons.
The ultrasonic sensor is designed in type of protection 'n' for use in category 3G and in type of protection by enclosure 't' for category
3D.
CONDITIONS OF CERTIFICATION: YES as shown below:
The connection of the sensor with integrated M12 flange socket must be equipped with an M12 connector separately certified for this
purpose. The connector has to comply with the requirements according EN/IEC 61076-2-101.
The external earthing has to be established by the end user in the end use application.
V01.01 | 10/2016
IECEx Certificate
of Conformity
IECEx BVS 16.0035X
2016-05-31
Schedule
Issue No: 0
Page 3 of 4
43
Publicité
Table des Matières
