Lubrication; Ce Declaration Of Conformity - Facom NM.3030F Notice Originale

PLACING THE MACHINE IN SERVICE

LUBRICATION

Always use of an air line lubricator with these tool. We
recommended the following Filter-Lubricator-Regulator
Unit: FACOM N.582.
Every eight hours' operation, if a lubricator is not used on
the compressed air network, inject 1/2 to 1cm
machine's inlet connection.
Optional tool support hangersfor use
with balancers. Not for hoisting tool or
securing.
Model Square
NM.3030F
NM.3030LF
Model Free speed
rpm
NM.3030F 5000
NM.3030LF 5000
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER
OUR OWN RESPONSIBILITY THAT THE PRODUCTS NM.3030F & NM.3030LF – FACOM 1" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD
EN ISO 11148-6: 2012
EN ISO 12100:2010
EN ISO 15744:2008
EN ISO 28927-2:2009
NU-NM.3030F NM.3030LF 0415.indd 8
through the
3
Impact Max.
drive rate Torque
'' bpm N.m
1" 1000 3390
1" 1000 3390
Air Working
consumption pressure
l/min bar
238 6,2
238 6,2
** k = measurement uncertainty in m/s²

CE DECLARATION OF CONFORMITY

EMERGENCY
GATE VALVE
Optional outside trigger
Noise level
Pressure Power
dB(A) dB(A)
k* k*
104,4 3 115,4 3
105 3 116 3
Weight Dimensions
kg mm
8,07 493,2x101,7x97,3
9,07 346,4x101,7x97,3
Vibrations
level
m/s
2
Pressure
dB(C)
k* k**
121 3 14,75 1,96
120 3 15,6 2,05
23.01.2015
FACOM QUALITY MANAGER
4/30/2015 1:08:17 PM