Diehl Metering IZAR OH BT 2 Guide Utilisateur page 10

IZAR OH BT 2
Class 1 IRED product
IZAR OH BT 2 contains a Class 1 infrared emitting diode (IRED)
according to IEC 60825-1. All users should follow the cautionary
instructions below; use of the product other than specified here may cause
hazardous radiation exposure.
ƒ
Do not stare at the IRED or shine the IRED into your eyes or those
of another person.
ƒ
Do not allow young children to use the product without adult supervision.
ƒ
Do not try to replace or repair the IRED; these components are not
user replaceable.
ƒ
Do not shine the IRED on a reflective surface.
ƒ
Do not scratch the lens.
ƒ
Do wipe the lens periodically with a clean, soft cloth.
ƒ
Do contact Diehl Metering customer support if you need technical or
other assistance.
Battery
The internal battery is not intended to be removed by unauthor-
ized parties. For servicing, please contact Diehl Metering cus-
tomer support.
ƒ
Do not place the device in or near a heat source. Excessive heating
can damage the device and/or the battery. Exposing these compo-
nents to excessive heat for a prolonged period could cause the device
or the battery to explode.
ƒ
Do not dry a wet or damp device with an appliance or heat source.
Extreme heat sources can adversely affect the internal battery com-
ponents even though the outside might not appear damaged.
ƒ
Do not store your device in environments with high levels of humidity.
In the event of equipment error, discontinue use and contact the
responsible customer support immediately.
An equipment error applies when, for example, the housing and/
or the supply line is damaged.
The equipment may only be operated and charged with approved
power supply. The attached power supply may only be used for
voltages indicated on the power supply.
-10-
English