Energy Saving Tips; Disposing Of Your Old Appliance - Danby DAR033A1BBUD1 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

ENERGY SAVING TIPS

Try not to open the door too often, especially when the weather is hot and humid. Once you open the door, close it as
soon as possible.
Every now and then check if the appliance is suffi ciently ventilated (adequate air circulation behind the appliance).
Set the thermostat from cooler to warmer settings whenever possible (depending on how loaded the appliance is,
ambient temperatures etc.).
Before loading the appliance with packages of hot food, make sure that they are cooled to ambient temperature.
Ice and frost layers increase energy consumption, so clean the appliance as soon as the frost layer is 3-5 mm thick.
If the gasket is damaged or the door seal is poor, energy consumption is substantially higher. To restore effi ciency,
replace the gasket.
Always consider instructions stated in this manual.
This unit is not designed for outside installation, including installation anywhere that is not temperature controlled
(including garages, porches, carports, etc.).

DISPOSING OF YOUR OLD APPLIANCE

The refrigerator system of the appliance is fi lled with refrigerant and insulating substances which should be separately
treated and processed. Call your nearest authorized service agent or specialized servicing centre. If you are unable to
locate one, contact your local authorities or your distributor. Be careful not to damage any tubes that may be on the rear
wall of the appliance.
SAVE THESE INSTRUCTIONS!
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dar033a1bbud2

Table des Matières