Safety Device; Water Supply - LAVOR Pro MAJOR Manuel D'instructions

if not clearly indicated that the operation must be
carried out when the machine is on.
• K2
All the adjustment and activities that are
not described in this handbook must be carried
out by qualified and skilled operators to avoid
any accident or damage to the machine and to
the operator.
• K3 Carefully read this operating handbook befo-
re use.
It provides important information about a safe in-
stallation, use and maintenance of the machine.
• K4
The non-compliance with the safety me-
asures may entail serious injuries to the operator
and damages to the machine.
• K5
Carefully keep this handbook for consul-
tation purposes up to the machine final disman-
tling. The use and maintenance activities must
be carried out correctly; otherwise, the builder
cannot be held responsible for the damages to
people, animals or things deriving from the non-
compliance with the following instructions.
• K6
Check that both the machine and its com-
ponents are undamaged when unpacking them.
Contact your reseller in case of doubts.
• K7
Make sure that the rating corresponds to
the factory power line before energising the ma-
chine.
• K8
De-energise the machine before any cle-
aning or maintenance activity.
• K9
Never leave the machine energised if
unused. Turn the main switch off.
• K10De-energise the machine in case of failure
and / or troubles. Do not tamper with its controls
and equipment. Just contact the authorised after-
sales service points for servicing purposes and al-
ways order original spare parts.
• K11
The draining and loading pipes, the sa-
fety sheaths and the solenoid valves must not be
cut and tampered with. De-energise the machine
in case of damages
• K12
Any use of the machine other than the
one it has been built for represents an anomalous
condition and can cause serious damages to the
operating means and entail a serious risk for the
operator using it.
• K13
Never remove or hide the warning labels
applied to the machine.
• K14
The same instructions are valid for va-
rious models; some details may differ according
to the machine model.
• K15
Never touch or start the machine with
wet hands or bare feet;
• K16
Remove the casings and the doors of the
electric boards only once the machine has been
stopped and de-energised;
For fire-prevention purposes:
• K18
Keep all inflammable or combustible pro-
ducts away from the equipment area.
• K19
Obviously, the above-mentioned instruc-
tions are not sufficient to prevent all sorts of ac-
cidents; therefore, the user will have to be cau-
tious.
• K20 The machine must not be modified or chan-
ged in any way without the builder's written au-
thorisation.
• WARNING: We recommend the use of demine-
ralized water.
• WARNING: Never use the power cable or the
gun cable to move it.
> SAFETY DEVICE
• WARNING: the gun is fitted with a safety
catch. Whenever use of the machine is
interrupted it is important to operate the
safety catch to prevent accidental activation
of the jet.
Safety features:
- Safety valve
- Manostat
- Thermostat
- Pump with a by-pass valve or stopping device.
> STABILITY
• WARNING:
The machine must be always kept
on horizontal bases, in a safe and stable way.
> WATER SUPPLY
Water supply collection
Water supply from the water main
- Connect a supply hose (not included) to
the water inlet of the unit and to the water
supply.
- Open the water supply.
WARNING: (symbol) machine not
suitable for connection to the potable water
17
EN