Connecting To Audio Equipment - AKG Acoustics HSC 171 Mode D'emploi

3 Setting Up
3.2 Connecting to
Audio Equipment
3.2.1 HSC 171,
HSC 271
Table 3: HSC 171 and
HSC 271 connector
pinouts.
3.2.2 HSD 171,
HSD 272,
HSD 272 Single
Table 4: HSD 171,
HSD 271, and
HSD 271 Single
connector pinouts.
14
6-pin mini XLR connector
shield,
ground, audio
1 return, neg.
supply volt-
audio
inphase, pos.
5
supply volt-
6 mute signal
shield,
2
ground
3 audio left
4 audio right
1. Switch power to the mixer OFF.
2. Plug the jack plug into the desired headphone output.
3. Plug the XLR connector into the desired microphone input.
4. Switch power to the mixer ON.
5. Switch phantom power ON.
6-pin mini XLR connector
1 shield, ground
audio inphase
5
6 unused
2 shield, ground
3 audio left
4 audio right
1. Switch power to the mixer OFF.
2. Plug the jack plug into the desired headphone output.
1/4" jack
plug
age
age
shaft
ring
tip
1/4" jack
plug
shaft
ring
tip
HSC 171/271, HSD 171/271/Single
XLR connector on
phantom power
adapter
shield,
ground
1
audio
inphase, pos.
2
phantom volt-
age
audio return,
3 neg. phantom
voltage
XLR connector on
phantom power
adapter
1 shield, ground
audio inphase
2
3 shield, ground