Technical Data; Product Operation; Battery Preparation - Greencut CD-230P Manuel D'utilisation

TECHNICAL DATA

Model
Input voltage
Start of energy
Fuse
Frequency
Rated charging current
Load capacity
Load Voltage
Product weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.
BOX CONTENTS
1. Charger
2. Tweezers
3. Fuses
4. UK Adapter
5. User's manual
• Carefully remove products and accessories from the box. Check that all items listed above are included.
• Inspect the product to make sure it has not been damaged or broken while being transported.
• Do not discard packaging materials until you have had the opportunity to carefully inspect the product and have
used it satisfactorily.
ATTENTION: If there are damaged or missing parts, contact the Official Technical Service. Do not
use this product without replacing the damaged or missing part. Use of this product with damaged
or missing parts can cause serious injury to the operator.

PRODUCT OPERATION

ATTENTION: During operation, place the battery charger in a stable position and ensure that the air flow
through the openings is not obstructed, ensuring sufficient ventilation.

BATTERY PREPARATION

ATTENTION: Before charging, check that the capacity of the battery (Ah) to be charged is not less
than that indicated on the battery charger data plate (Cmin). Follow the instructions carefully in the
order indicated.
CHARGER
CD-230P
220V - 240V
280A
50A
50Hz
30A (12V), 40A (24V)
1kW
12V - 24V
14 kg
1 2 4
3
5
ES
37
EN
FR IT EN i