Configuration Du Programme - WatchGas QGM Manuel D'utilisation

Manuel d'utilisation
6. Configuration du programme PConfiguration
CONFIGURATION
Calibration interval: 0~ 365 days
Bump interval: 0~ 365 days
Low / High Alarm Setting
- H2S : 0 ~ 100.0
- CO : 0 ~ 300
- O2 : 0 ~ 30.0
- LEL : 0 ~ 100.0
STEL / TW A Alarm Setting
- H2S : 0 ~ 100.0
- CO : 0 ~ 300
Detector U ser ID
TW A Method
- ACG IH : Accumulation Average
- OSHA : Movement Average
STEL
- Default : 15 minutes average
Safe Display : In the safe area, SAFE will displaced.
TW A
Dock Lock : Lock the bump / calibration
- Default : 8 hours
Maintenance Notification
average
Latching Alarms : U ntil the users push the button,
the alarm will be activated continuously.
Auto Zero : W hen the device is turned on, the
zero calibration will be activated.
Lel by volume : 100%LEL Standard
Off Lock : Prevent users from turning off the
device.
QGM Docking Station
9
D e t e c t i o n D e t e c t i o n
Choose the W atchG as
firmware
Initiate the firmware upload.
www.watchgas.eu