Operation Instructions; Service And Replacement Parts; Warranty; Disposal - erba 2T Mode D'emploi

GB - INSTRUCTION MANUAL

8. OPERATION INSTRUCTIONS

Pulling
Lock the spring (6) as shown in (A). Now you can put tension on the cable by using the handle (4)
and start pulling the load.
Release
To release the cable the spring (6) must be unlocked as shown in (B). CAUTION: never unlock the
spring when the winch is still under tension/load!
Unwinding the cable
Once the cable is released pull the handle (4) all the way towards the load hook (2) and holt it in
this position. Now you can easily unroll the cable.

9. SERVICE AND REPLACEMENT PARTS

Use original replacement parts only!

10. WARRANTY

Legal warranty regulations apply.

11. DISPOSAL

Our products are packed in order to prevent damage during transport. Packing materials are va-
luable resurces and therefore can and should be recycled. The product itself consists of various
materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your
federal and local disposal regulations.

12. LEGAL INFORMATION

All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is
strictly prohibited without the written permission of ERBA GmbH.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 11
Changes, print, punctuation and other errors reserved!
Instruction manual
03019
Issue: 05/2018