Giatsu VIOLET UV GIA-S09VIOUV Manuel De L'utilisateur page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tips
Install the unit on the north side, as normally that is the shaded side. This
will enhance the operation of your unit.
Use correct electric voltage and proper ampere for the unit to run effectively.
Only let a certified electrician do any modifications to your electrical outlet or
breaker.
Use a dedicated line for the operation of your air conditioner to avoid the
possibility of an electrical surge.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
The dimensions of the space necessary for correct installation of the
appliance including the minimum permissible distances to adjacent structures.
The appliance shall be installed in accordance with national wiring regulations.
Disconnect the power supply before cleaning and maintenance.
If the appliance is not connected by plug,an all-pole disconnection device
which has at least 3mm separation distance in all pole and a residual
current device(RCD)with the rating of above 10mA shall be incorporated in
the fixed wiring according to the national rule.
If the appliance is connected by plug,it must be positioned so that the plug
is accessible.
Energy Saving Guide
When installing your air conditioner make sure to seal all areas where there is
a possibility of air leakage.
Airflow should not be blocked inside either by curtains, drapes or furniture or
outside by shrubs or bushes.
Do not needlessly use an electrical light or other appliances that produce heat.
Keep the blinds and the drapes drawn on all the other window.
While cooking use an exhaust fan in the kitchen to remove the excess heat
produced.
USER'S MANUAL
26

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières