Technical Specifications; Brightness Adjustment - Genie TL42 LCD Mode D'emploi

Delivery
• LED desk lamp
• USB charging cable
• Operating manual

Technical specifications

See page 25
On / Off Switch
Insert the plug of the AC adaptor into the socket on the back of the lamp and the mains plug
into a socket that is installed in the appropriate way.
Place the lamp on a level and non-slip surface, slide the power switch to the ON position, the
lamp is now on.
Briefly touch the sensor button " " to switch the light on / off.
Set the light color
Briefly touch the " " to change the light color from warm-white 3000K in 3 levels to cold-
white 6500K.
When the lamp is switched on again, the last setting is accepted.

Brightness adjustment

When the lamp is lit touch the sensor button " " or " " until the desired brightness is
reached.
LCD display
In the time display mode, press "Down" to select in the temperature display in ℃ or ℉.
Touching the sensor " " turns on the LCD display.
Set time
In the TIME display mode, press the "Set" button, now the time will flash (hour), press "Up"
and "Down" to set the hour. Press "Set" again and the time (minute) will flash, press "Up" and
"Down" again to set the minute.
In the setting mode, the display returns to the time by pressing the "Mode" button or no
button for about 1 minute.
In the clock display mode, press "Up" to select the display for 12 hours or 24 hours.
Set date
In the display mode TIME 4x press the "Set" button, now the month which is set with the
buttons "Up" and "Down" will flash, by pressing the "Set" button again the day can be set.
In the TIME display mode, press the "Set" button 3 times, now the year number, which is set
with the "Up" and "Down" buttons, flashes.
In the setting mode, the display returns to the time by pressing the "Mode" button or no
button for about 1 minute.
Set alarm
In the TIME display mode, press the Mode button to enter the ALARM display mode.
7