Varan L225-A Manuel D'utilisation page 20

• Adjustable Speed [1-4]
Adjust the speed from 800-1700rpm by turning the speed wheel [1-6]. In this way, user can choose different speed for
different sanding surface.
Replace Sanding Pad 【1-5】
• Insert the hex wrench (size 5) into the hexagonal screw bolt on the sanding pad
• Hold the sanding pad firmly, and then turn the wrench to dismount the pad.
• Install new sanding pad by tightening the bolt
Attention: Only install the specified sanding pad on the machine.
Stick the Sanding Paper to the Pad【1-6】
Please ensure the holes on the sanding paper to fit the holes on the pad accurately.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg T: 00352/26908036 – F: 00352/26908040
L225-A