Digital Manual Search; Analogue Manual Search; Analogue Fine Tune; First Time Installation - TECHWOOD TD26FTHW11 Mode D'emploi

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use
" "/" " button to highlight an item and then press "
" or " " button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation
menu by using " " or " " and OK buttons. Analogue
fi ne tune screen will be displayed. Analogue Fine
Tune feature will not be available if there are no
analog channels, digital channels and external
sources stored.
• Press OK button to proceed. Use " " or " " button
to set Fine Tune. When fi nished, press OK button
again.

First Time Installation

Select First Time Installation line and press OK button.
Enter the PIN number you have previously set during
the fi rst time installation. If the correct PIN number is
entered, installation process will start.
woypbpr_A02_MB60_[GB]_3900UK_IDTV_NICKEL16_26900W_10070187_50176828.indd 44 woypbpr_A02_MB60_[GB]_3900UK_IDTV_NICKEL16_26900W_10070187_50176828.indd 44
See the section, "First Time Installation" at the
beginning of instruction book for more information
on the process.

Clear Service List (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press " " or
" " button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
Press OK to cancel. Select Yes by pressing " " or " "
button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List. You
can edit this channel list, set favourites or set active
stations to be listed by using the Channel List options.
• Press MENU button to view main menu. Select
Channel List item by using " " or " " button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use " " or " " and OK buttons to select
Edit Channel List.

Operating the Channel List

• Press " " or " " button to select the channel that
will be processed. Press " " or " " button to select
a function on Channel List menu.
• Use P+/P- buttons to move page up or down.
English - 44 -
21.10.2010 08:31:56 21.10.2010 08:31:56