Kicker KMC5 Manuel D'utilisation page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SPECIFICATIONS
Model
Power Output @ 14.4V, 2Ω stereo, <10% THD+N
Power Output @ 14.4V, 4Ω stereo, <10% THD+N
Frequency Response [Hz]
Signal-to-Noise Ratio [dB]
Pre-Amp Outputs
Input Sensitivity
USB Playback
USB Charging
USB Compatible File System
IP Rating
Line-Out Level [V]
Outer Trim Dimensions[in, cm]
Protrusion From Mounting Surface [in, cm]
Total Mounting Depth [in, cm]
Mounting Hole Diameter [in, cm]
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
5
KMC5
40W x 6
25W x 6
20 – 20k
100
Front, Rear, Sub, Zone2
Adjustable 500mV–1.5V
MP3/WMA/FLAC/WAV
DC 5V, 1A
FAT32
IP66
4
3.5 x 5.5, 8.89 x 13.97
1-5/16, 3.33
5, 12.7
3, 7.62
Be careful not to drill into wiring or vehicle mechanisms.
You are solely responsible for securely mounting the KMC5
Media Center. See page 2–3 for mounting hole cutout
template.
Before installation, you may wish to plan your placement of
the USB and Auxiliary inputs, and the optional KRC12 and
KRC15 remotes (sold separately), for both convenience
and looks!
With a KICKER KXM amplifi er, a pair of KICKER KM
speakers, and a few KICKER cables, you're looking at a full
system upgrade that will dominate! KICKER amplifi ers and
accessories make upgrading a snap. Ask your dealer about
KICKER amplifi ers and speaker upgrades to complete your
system!
All specifi cations and performance fi gures are subject
to change. Please visit www.kicker.com for the most
current information.
WARNING: KICKER products are capable of producing sound levels
that can permanently damage your hearing! Turning up a system to a level
that has audible distortion is more damaging to your ears than listening to
an undistorted system at the same volume level. The threshold of pain is
always an indicator that the sound level is too loud and may permanently
damage your hearing. Please use common sense when controlling
volume.

Publicité

Table des Matières
loading

Table des Matières