Hive Window or Door Sensor Mode D'emploi page 5

Fix it in place
3
Check your sensor's signal before fixing it in
place. You can do this in the Hive app or
online dashboard under Manage devices.
One part of the sensor goes on the door
and the other part goes on the frame.
Arrange both parts so that the marked
strips are aligned.
The sensor parts should ideally be no
more than
or window is closed so that they trigger
when opened.
When fixing the sensor in place, ensure
there is enough space to slide open the
case for future battery replacement.
Using the adhesive strips:
• Stick another strip to the bigger part of
the sensor.
• Wipe the area on the door or window
frame where the adhesive strips will be
attached and allow to dry.
• Remove the backing from the adhesive
strips so that you can firmly place the
sensor on the door or window frame.
Remember: Removing the provided adhesive strips
from paint can leave marks on the surface.
/ " apart when the door, cabinet
3
8