Uline H-11486 Manuel

H-11486
MOBILE FLOOR STANDING
SIGN HOLDER
TOOLS INCLUDED
3 mm Allen Wrench
5 mm Allen Wrench
Base x 1
Caster x 4
1. Attach casters to base
using lock washers.
(See Figure 1)
2. Tighten casters using
13 x 14 mm wrench.
PAGE 1 OF 6
13 x 14 mm
Wrench
Frame x 1
Lock Washer x 4
Figure 1
1-800-295-5510
uline.com
PARTS
M4 x 12 mm Hex
Head Screw x 4
ASSEMBLY
3. After all casters are
secure, insert two
M6 x 35 mm hex head
screws inside the holes
located underneath
base between casters.
Repeat on opposite
side of base.
(See Figure 2)
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Pole x 2
M6 x 35 mm Hex
Head Screw x 4
1124 IH-11486
Figure 2