Adjustment; Connecting The Speakers - EDIFIER R1280T Manuel D'utilisateur

Connectivity & Operational guide

Connecting the speakers

Connect the active speaker and passive speaker with the included connecting cable (golden cable to red wire
clamp, and silver cable to the black).
Connect audio source like PC sound card to active speaker with the included 3.5mm to RCA connector cable.
Connect to A.C. Power Outlet
Please connect the A.C. power plug to the correct A.C. voltage outlet.
5
English
Power
On Off
Connectivity & Operational guide

Adjustment

→
Play the audio on your connected device and adjust
master volume/bass/treble to a desired level.
volume
Note: If two audio sources are connected simultaneously, both signals will play. To dedicate audio
output from one source, decrease the volume or power off the unselected device.
6
English