Homak SE Série Guide D'utilisation Et Directives De Fonctionnement page 4

MOUNTING YOUR UNIT TO THE WALL
1. Open the doors to your unit and locate the 4 mounting holes.
2. Align the mounting holes with two sixteen-inch wall studs.
3. Pre-drill through each mounting hole before installing the screw.
4. Secure the back of the cabinet to the wall studs using the 4 screws(J)
and washers (K) provided.
BACK OF UNIT
ARRIÈRE DE L'UNITÉ
PARTE TRASERA DE LA UNIDAD
- 4 -
16 " or
40,6 CM