Care Instructions - DJO Global Cefar PERISTIM PRO Mode D'emploi

9. CARE INSTRUCTIONS

Taking care of and cleaning the Cefar-Compex equipment is simple with the following instructions:
22
• For care and cleaning instructions of probes, see probe package.
• Self-adhesive multi-use electrodes are re-moistened if necessary with a few drops of water and
kept air-tight (in a plastic bag) on protective paper when they are not in use.
• Rinse the carbon rubber electrodes and the skin with water after use. Do not use detergent for the
electrodes.
• Never expose the stimulator to water. Wipe it off with a damp cloth if necessary.
• Do not jerk cables or connections.
• The cables are best preserved if left attached to the stimulator between sessions.
• No other maintenance of the device is required. Service life of the device can vary depending on
usage conditions. Typical service life ifs 7 years.
• Never service the device while in use
• The device should be operated in temperatures between 10°C and 40°C, atmospheric pressures
between 50 and 106 kPa, and relative humidity between 30% and 75%.
• The device should be transported and stored in temperatures between -40 °C and 70 °C, atmos-
pheric pressures between 50 and 106 kPa and relative humidity between 10% and 90%.
• Contact manufacturer for assistance in setting up, using or maintaining the equipment or report
events.