Power Supply Section - A.N.T iRoller8 Notice D'emploi

15 BATTERY LEVEL LEDS
Power and internal battery status indicators
CHARGE: Lights up while the internal battery is being charged. When the battery is
fully charged, the CHARGE LED turns off. In order to charge the battery, the power
cable must be connected to the mains socket.
3: fully charged battery.
2: Battery half charged.
1: low battery, please recharge it soon.
LOW: low battery, connect the unit to the mains.
15

3.2 | POWER SUPPLY SECTION

iROLLER 8
6 User manual |
1
2
3
1
2
POWER ON/OFF
Use this switch to turn On/Off the unit.
MAINS INPUT
IEC power socket with integrated fuse-holder. Plug the power cord into
this socket, but make sure the device is switched off before connecting
the power cord to mains. For your safety, never disconnect the earth lead.
CAUTION: Replace the fuse only with one of the same type and with the
same value.
If the fuse blows repeatedly, contact an authorized service center.
BATTERY OPERATION
This selector allows you to activate or deactivate the battery included
inside the unit. Set the selector to OFF if the system is not used for a
long time, in order to preserve the life of the battery itself.
3
iROLLER 8
7
| User manual