Haus SLM40C Manuel D'utilisation page 12

OPERATION
Other cutting heights are achieved by moving the adjustment
4.
knobs to any stop between the highest and lowest positons.
To adjust cutting height, pull knob out and rotate to desired setting.
5.
Height adjustment knob
Using Your Lawn Mower
Please observe the following when operating your reel mower.
1. Be sure lawn is clear of stones, sticks,wire,or other objects which
could damage lawn mower or engine.
2. Mow the mower when the grass is relatively dry.Attempting to mow
wet grass can result in an uneven cut.
3. Maintain a consistent walking pace while pushing the mower in
straight passes.
4. Slightly overlap each pass to even the cut and avoid leaving uncut
strips.
5. Mow the lawn regularly,at least once a week during the growing
season.Mow more frequently than you would with a conventional
rotary lawn mower.
6. Always mow with the blade height adjusted to cut no more than
1/3 the total height of grass.
7. If the height of your lawn's grass exceeds four inches,adjust
the blade height to its highest position before mowing.After
mowing,readjust the blade to your preferred cutting height and
mow the lawn a second time within the next one or two days.
Position B
11
(Fig.11)