Koba Vision Vocatex 3 Mode D'emploi page 25

Masquer les pouces Voir aussi pour Vocatex 3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Button 6:
Overview/magnification (default)
Switch between magnifier and computer, Reset, Reading aloud
LIGHTING
By turning button 9 you can set the brightness of the camera and button lights.
READING LINE
The horizontal reading line is a line from left to right on the screen.
Press button 8 until the line is displayed on the screen. Turn button 8 to set the position. Press and turn
button 8 to change the colour.
READING BAR
The horizontal reading bar is a clear bar from left to right on the screen. The text that isn't covered
by the bar is slightly visible.
Press button 8 until the bar is displayed on the screen. Turn button 8 to set the position. Press
and turn button 8 to change the width.
HEADPHONE
A headphone or external speakers can be connected at the EasyViewer/Quartz (see mini-jack
connector on the back).
SLIDING TABLE
HEIGHT AND TILT ADJUSTMENT
Height (Flex arm and large screens)
According to personal preference, the screen
of the Vocatex can be moved up or down. To
do this, make sure you take hold of the screen
on both the left and right side of the screen.
KOBA Vision EasyViewer/Quartz
Under the table you can find a lever which controls the brake. If you
move the lever to the left, the slide table is free to move
left/right/up/down. If you move the lever to the right you adjust the
friction. If you move the lever all the way to the right, the slide table
will be blocked.
24

Publicité

Table des Matières
loading

Table des Matières