Baninni ROADTRIP IMPERO ISOFIX BN3501 Mode D'emploi page 16

MANUAL
Usage
4.1. Install position of the child seat in vehicle
Correct fitting/suitable
4.2. Checking the shoulder strap height
NO- too low
Always check that the shoulder straps are at the correct height for your child.
The child's shoulders should always be thread through the slots in the cover
and seat shell that are closest to the top of your child's shoulders.
This child seat is suitable for fixing into
the seat positions of the cars equipped
ISOFIX anchorage that are fitted in
accordance with Euroapean standard
(ECE44or equivalent standard).
IMPORTANT
The child seat must only be installed
using ISOFIX anchorage.
NO - too high
Incorrect fitting/not suitable
Only use on this seat if ISOFIX
anchorage is equipped.
YES - CORRECT