Features; Assembly - Ryobi HPL51 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Maximum Planing Depth .........................................3/32 in.
Maximum Planing Width ....................................... 3-1/4 in.
Maximum Rabbet Depth .........................................7/16 in.
KNOW YOUR PLANER
See Figure 1, page 11.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DEPTH ADJUSTMENT KNOB
Adjust the planing depth from 0 to 3/32 in. in 1/64 in. incre-
ments.
DUST BAG
The dust bag attaches to the planer and helps keep the work
area free of dust and debris.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may
contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive
harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.

FEATURES

No Load Speed ................................................17,000/min.
Input ................................ 120 V, AC only, 60 Hz, 5.0 Amps
EDGE/RABBET GUIDE
The edge guide included allows you to plane edges and
make rabbet cuts.
KICKSTAND
The kickstand allows you to set the planer down on
a workpiece or clear table area without damaging the
workpiece or the blades.
LOCK-OFF BUTTON
The lock-off button locks the switch trigger in the OFF posi-
tion when the switch trigger is released.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
6 - English