4.1 Main switch. Turning the appliance on
-
To turn the appliance on, put the main switch of
the appliance to the "I" position.
-
To turn the appliance off, put the main switch to
the off position "O".
4.2 ON/Standby Mode
-
To set the appliance to Standby, press "C"
button
-
All modes including the pilot wire are suspended,
but power to the appliance is on, waiting for one
of the modes described below to be selected.
-
To turn the appliance on, press "C" button.
-
The LED L1 becomes red when the appliance is
heating and becomes green when the ambient
reaches the desired temperature.
4.3 Comfort Mode
The "Comfort" temperature corresponds to the
temperature desired by the user.
-
Set the desired temperature turning the knob
"B". The temperature regulation ranges from 7
°C to 34°C.
-
The LED L1 becomes red when the appliance is
heating and becomes green when the ambient
reaches the desired temperature.
The appliances may need to be regulated differently to obtain the same room temperature
according to the different conditions of the rooms where they are installed (number of
people present, exposure to the sun etc.).
Fig. 8
L1 Red/Green
59
EN
Main Switch
"A"
Button "C"
Knob "B"