Create BBQ Smokey Compact Manuel D'utilisation page 8

A
1. Using a Phillips screwdriver, take the 6
screws A (M5x25 mm) to mount the legs.
3. Then open the lid and place the lid lock
stick so that it stays open.
5. After placing the base of the chimney,
with a screw C (M6x10 mm) insert the
cover of the air outlet. Then place the
thermostat adjusting it in the corre-
sponding hole in the barbecue lid.
E NGL I SH
8
MOUNTING
D
B
2. Then use 2 screws D (M4x16 mm) and 2
screws B (M5x10 mm) to mount the bar-
becue lid grip handle.
4. After blocking the cover so that it does not
close, place the base of the chimney with
the help of the 4 screws C (M6x10 mm).
C
6. Once all the components of the cover have
been assembled, place the covers of the
air outlets on the body of the barbecue
with the help of 2 screws C (M6x10 mm)
and make sure that they are well fixed.
C
C