Télécharger Imprimer la page

Chamberlain 111014 Schéma De Raccordement

Télécharger ce manuel

Les langues disponibles

INTRODUCTION

The Power Line Converter allows the connection of a PNP sensor with an

active output to an LMi5 interface or other LiftMaster operators, which

expects dry contact signals.

The device provides +24VDC to the sensor from its onboard power

supply. The figure below shows the Power Line Converter's connection

diagram between LMi5 and WS-Sensor-E.

Carton Inventory: 1 Unit Power Line Converter device

Not Included: Mounting hardware, WS-Sensor-E, LMi5, 100MAPS

Input Power: 120 VAC 60Hz or 100MAPS (+24VDC)

Important:

Please refer to manufacturer's manual for

electrical specifications of the device.

114A5843

CONNECTION DIAGRAM FOR

POWER LINE CONVERTER

WARNING: This product can expose you to chemicals

including lead, which are known to the State of California to

cause cancer or birth defects or other reproductive harm. For

more information go to www.P65Warnings.ca.gov.

PART #111014

Note:

Dry use only.

Secure firmly to the wall.

LiftMaster

300 Windsor Drive

Oak Brook, IL 60523

LiftMaster.com

Page 1 CONNECTION DIAGRAM FOR POWER LINE CONVERTER PART #111014 INTRODUCTION WARNING: This product can expose you to chemicals including lead, which are known to the State of California to The Power Line Converter allows the connection of a PNP sensor with an cause cancer or birth defects or other reproductive harm. For active output to an LMi5 interface or other LiftMaster operators, which more information go to www.P65Warnings.ca.gov.
Page 2 SCHÉMA DE CONNEXION POUR LE CONVERTISSEUR DE PUISSANCE RÉF. N° 114A5843 INTRODUCTION AVERTISSEMENT : Ce produit peut vous exposer à des produits chimiques, dont le plomb, qui sont reconnus par l’État Le convertisseur de puissance permet de connecter un capteur PNP de Californie comme provoquant le cancer, des malformations ayant une sortie active à...