Operation
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Care and Cleaning
EXTERIOR MAINTENANCE
Use a dry or slightly dampened clean cloth
and wipe the surface of the fixture.
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning off
the circuit breaker or by removing the fuse at
the fuse box.
Use a dry or slightly dampened clean cloth to
wipe the interior surface of the fixture.
Troubleshooting
Problem
The light will not turn on.
The fuse blows or the circuit breaker trips
when the light is turned on.
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
Solution
Make sure the power supply is on.
Test or replace the switch.
Check the wiring.
Replace the light bulb.
Check the wire connections.
7