ALARM
Button N
TIME ^4
V
Button
/
/
/
'
SNOOZE^
Button
HOUR
Button
minute
Button
^SNOOZE]),
\
^— -\jji- OFF ON ALARM
Switch
Battery Backup:
A 9-volt battery (not included) may be installed as a backup option to maintain the time if electrical
power fails. In the event of a power outage, the time will not appear on the clock LED display;
however, the clock will continue to operate and the actual time will be maintained. The clock LED
display and other functions will resume once electrical power is restored. If used, the 9-volt battery
should be replaced as needed. Remove the battery if the clock is not used or stored for long periods
of time.
NOTE: Spent or discharged batteries must be recycled or disposed of properly in compliance with ail
applicable laws. For detailed information, contact your local county solid waste management
authority.
To set the time;
1. Plug the product into a standard 120V 60 Hz AC electrical outlet.
NOTE: The LED Display will blink until the time Is set.
2. To set the current clock hour(s), press and hold the TIME Button; then repeatedly press the Hour
Button unlil the correct hour(s) is reached.
NOTE: The PM Indicator will illuminate to indicate PM hours.
3. To set the current clock mlnute(s), press and hold the TIME Button; then repeatedly press the
Minute Button until the correct minute(s) is reached.
P^iiftheiSarm hour(s), press.and hold the ALARM Button; then press the Hour Button until the
2, To^UhealSm minute(s), press and hold the ALARM Button; then press the Minute Button until
the desired minute(s) is reached.
3
Slide the OFF ON ALARM Switch to the "ON" position.
4
To silence the alarm, slide the OFF ON ALARM Switch to the OFF position
5. To use the snooze feature to silence the alarm, press the SNOOZE Button when the alarm
sounds. The alarm will be silenced for about nine (9) minutes and then sound again.
Model
G-1855
Before operating this product, read, understand, and follow these instructions.
Be sure to save these instructions for future reference.