Classic Accessories Quadgear Extreme UTV Rear Window Instructions

Instructions: UTV Rear Window
WARNING
Make sure your field of view is not obscured after
mounting your Rear Window to your UTV roll cage.
CAUTION
Be sure your Rear Window is strapped securely and
tightly to your UTV roll cage.
INsTAllATION
Attach the top straps to the roll cage uprights first
then attach the bottom straps.
Working with the top straps first, tighten or loosen
the straps to position the window in the center of
the roll cage uprights. Once it is centered and level,
tighten all the straps.
If installing with a Classic Accessories Quadgear
Extreme UTV Roll Cage Top (not included) note that
the Roll Cage Top attachment straps should go below
the top attachment straps of the your Rear Window.
CleANING
Don't clean the clear plastic of your Rear Window
when it is dry—you can scratch it. The best way to
clean the clear plastic is to hose it with water and rub
it with your bare hands. Liquid soap may be used.
Clean the fabric areas of your Rear Window with a
soft brush and warm water. DO NOT USE SOAP as it
can damage the protective coatings on the fabric.
Air dry.
sTORAGe
To avoid mildew be sure that your Rear Window is
completely dry before you store it for an extended
period in an enclosed area.
WARRANTy
Your Rear Window is factory warranted for
workmanship and materials for two years after
purchase.
78637, 78647, 78657, 78667 07cA51_6609