Chauvet STRIKEARRAYFLUSHBRACKET Guide De Référence Rapide page 2

EN
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the Strike Array Flush Bracket.
• ALWAYS:
• Use a safety cable when mounting this product overhead.
• DO NOT:
• Leave any flammable material within 50 cm of this product while operating.
• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
• Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not
limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations where normal temperatures exceed the temperature ranges in this manual.
• Locations that are prone to flooding or being buried in snow.
• Other areas where the product will be subject to extreme radiation or caustic substances.
• In the event of a serious operating problem, stop using immediately.
What is Included
• Strike Array Flush Bracket
• Quick Reference Guide
Mounting
Before mounting this product, read the
weight of the product. For the Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
1
QUICK REFERENCE GUIDE
Safety Notes. Make sure the mounting clamps are capable of supporting the
Mounting clamp
Strike Array
Flush Bracket
Safety cable
Strike Array Flush Bracket QRG Rev. 2