Night Stick XPP-5458G Mode D'emploi

Operating Instructions for
Intrinsically Safe Headlamp
Thank you for purchasing this Nightstick product. Save this instruction.
Please read these instructions before using your Nightstick. It includes important safety and operation
information.
MODEL XPP-5458G IS APPROVED FOR USE
INTRINSICALLY SAFE
WARNING: TO PREVENT IGNITION OF A HAZARDOUS ATMOSPHERE, BATTERIES MUST
ONLY BE CHANGED IN AN AREA KNOWN TO BE NON-HAZARDOUS.
WARNING: USE ONLY ENERGIZER E92 or EN92 BATTERIES.
WARNING: TO REDUCE THE RISK OF EXPLOSION, DO NOT MIX OLD BATTERIES WITH USED
BATTERIES, OR MIX BATTERIES FROM DIFFERENT MANUFACTURERS.
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
SPECIAL INSTRUCTIONS FOR INTRINSICALLY SAFE MODEL
For personal safety, always confirm the rating of any known hazardous or potentially hazardous
location where the flashlight is planned to be used.
OPERATION
Tilt Adjustment
The headlamp light pivots on a ratchet. Adjust the tilt angle of the light to illuminate the desired
vision area.
XPP-5458G
This model has two switches to control the spotlight and the white and red floodlights. The
flashlight and floodlight functions can be operated independently or together.
Spotlight Operation
To turn on the spotlight, press the spotlight switch. Press again to turn off.
Floodlight Operation
The floodlight switch controls 3 floodlight functions.
First Press: White floodlight on - full power
Second Press: White floodlight on half-power
Third Press: White floodlight off - Red LED floodlight on.
Fourth Press: Floodlight function off.
CAUTIONS
Warning – Substitution of Components May Impair Intrinsic Safety.
•
Warning – To reduce the risk of explosion do not mix new batteries with old/used batteries, or
•
mix batteries from different manufacturers
Warning – To reduce the risk of ignition of a flammable or explosive atmosphere, batteries must
•
be changed only in a location known to be non-hazardous
Warning – Risk of ignition – Do not open in a hazardous area
•
HEADBANDS
The headlamps include two types of headbands:
Elastic Non-Slip Headband: Use this headband for mounting the headlamp directly to your head. The
Non-slip feature will keep the light positioned on the head even with vigorous movement.
Rubber Hardhat Strap: Use the rubber strap on any hardhat. The tacky nature of the strap will keep
the headlamp attached even if the hat is dropped.
INSTALLING OR CHANGING BATTERIES
CAUTION
TO REDUCE THE RISK OF IGNITION OF A FLAMMABLE OR EXPLOSIVE ATMOSPHERE,
BATTERIES MUST BE CHANGED ONLY IN A LOCATION KNOWN TO BE NON-HAZARDOUS
1. Loosen the battery door screw located on the back of the battery pack.
2. Install 3 AA batteries in the pack. Use only approved batteries: Energizer EN91 or Energizer
Lithium L91.
3. Close the battery pack door and tighten the door screw.
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • +01 469-326-9400 • www.baycoproducts.com
XPP-5458G
WARRANTY
Limited Lifetime Warranty
Product is warranted to be free from defects in workmanship and materials for the lifetime of the
original owner. Includes the housing, lenses, electronics and switches. Batteries, normal wear and
abuse are excluded.
Not Covered
Consequential damages, incidental damages or incidental expenses, including damage to property.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, which
may vary from state to state.
Warranty Claims - USA
Contact Bayco Products, Inc. for USA warranty claims. Call 800-233-2155 or email
cs@baycoproducts.com and Bayco Customer Service will provide a Return Goods Authorization
(RGA) to facilitate rapid warranty action. After receiving the RGA, send the product (shipping prepaid)
to BAYCO PRODUCTS, INC. • 640 S. SANDEN BLVD • WYLIE, TEXAS • 75098. Include a dated
proof of purchase and a brief description of the defect with your name, address and phone number.
Your product will either be repaired or replaced at the option of Bayco and returned as soon as
practical, but no later than 45 days after being received by Bayco.
Warranty questions and international claims
If you live outside the USA or have questions about this warranty or an inquiry about other Bayco
products, contact BAYCO PRODUCTS, INC. • 640 S. SANDEN BLVD • WYLIE, TEXAS • 75098 or
call 800-233-2155 (or 469-326-9400)
Product Information
Date of Purchase ____________________________________________
Nous vous remercions d'avoir acheté ce produit Nightstick. Sauvegarder cette instruction.
S'il vous plaît lire attentivement ces instructions avant d'utiliser votre Nightstick. Il comprend la
sécurité et des renseignements importants opération.
MODÈ XPP-5458G SONT APPROUVES POUR UTILISATION
SECURITE INTRINSEQUE
AVERTISSEMENT: POUR ÉVITER L'INFLAMMATION D'ATMOSPHÈRE DANGEREUSE,
BATTERIES NE DOIT ÊTRE REMPLACÉ PAR UN TECHNICIEN DANS UNE ZONE CONNUE
D'ÊTRE NON DANGEREUX.
AVERTISSEMENT: UTILISER EXCLUSIVEMENT ENERGIZER EN91 OU ENERGIZER LITHIUM
L91 BATTERIES.
AVERTISSEMENT: AU REDUSE LE RISQUE D'EXPLOSION, NE MELANGENT PAS LES
BATTERIES UTILISEES AUX BATTERIES INUTILISEES OU NE MELANGENT PAS DES
BATTERIES DE DIFFERENTS FABRICANTS.
AVERTISSEMENT: LA SUBSTITUTION DE COMPOSANTS PEUT COMPROMETTRE LA
SECURITE INTRINSEQUE.
INSTRUCTIONS SPECIALES POUR LES MODE DE SECURITE INTRINSEQUE
Pour votre sécurité, vérifiez toujours la cote d'un emplacement connu dangereuse ou potentiellement
dangereuse où la lampe de poche est prévu pour être utilisé.
FONCTIONNEMENT
Réglage D'inclinaison
Les pivots lumière des projecteurs sur une clé à cliquet. Ajuster l'angle d'inclinaison de la lumière
pour éclairer la zone de vision désiré.
XPP-5458G
Les deux modèles disposent de deux interrupteurs pour contrôler le feu des projecteurs et les
projecteurs blancs et colorés. Les fonctions et lampe de poche projecteur peut être utilisé
indépendamment ou ensemble.
Opération Coup de Projecteur
Pour activer le feu des projecteurs, appuyez sur l'interrupteur feux des projecteurs. Appuyez à
nouveau pour l'éteindre.
Opération Projecteur
Le commutateur projecteur contrôle 3 fonctions projecteurs.
INS-5458-13F
Mode D'emploi Pour
XPP-5458G
Phares à Sécurité Intrinsèque