Little Tikes Ride & Relax 5-in-1 Trike Manuel page 2

INCLUDED HARDWARE
T1 x 8 (for K, M1/M2)
T2 x 1 (for E)
T3 x 1 +
T4 x 1 (for S)
T5 x 2 (for O)
T6 x 2 (for C)
T8 x 6 (for G, S & Q)
REQUIRED TOOLS FOR ASSEMBLY
Safety Goggles
2
N2 x 1 + x 1 (for D)
T7 x 2 + N1 x 2 (for B)
T9 x 2 (for Q lower)
(NOT INCLUDED)
Phillips Screwdriver
POSITION 5 - TRIKE
disengage pedals
engage pedals
ENGAGE PEDALS FOR POSITION 5
Push in button. Then, slide to move. Rotate the
front pedal if the button does not fully slide.
2
Remove seat cover
and sun shade
4
Remove seat back
Lock both rear brakes
when parked.
1
Push seat belts through the openings on the seat cushion. Undo
the clip under the seat and remove seat belt.
3
H
Remove handle with tray. Then, close the cap on the frame (A).
Replace handle lock (H) onto the frame or store in a safe place for future use.
5
A
Pull down seat lock lever on trike frame (A). Then, slide the seat to the
desired position. Press the seat lock lever up to lock the seat in place.
A
seat lock
lever
15