System Build 4549013COM Instructions De Montage page 11

STEP 5
IMPORTANT: THIS
THESE INSTRUCTIONS
PRODUCT.
WallboaFö
Pared
Hole
Agujero
7
WARNING
Serious or fatal crushing
can occur from furniture
To prevent tipover:
* Install tipover restraint provided
* place heaviest items in the lowest
drawers
* Unless specifically designed
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tipover restarints
reduce, but not eliminate
of tipover
OPTION 1: Attachment
Using a stud finder, locate a stud in the wall. Place your unit against the wall, With the safety bracket (7) aligned In this location
To make driving the screw easier, you can drill a 1/8" diameter Pilot hole (3mm) through the safety bracket (7) into the stud.
Drive the screw (2) through the safety bracket (7) into the wall stud. Tighten the screw (7) that was not fully tighened in step 1
OPTION 2: Attachment
Locate your unit where desired against a wall and mark the wall through the safety bracket (7), then move your unit aside
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor (6) into the hole until it is flush.
Move your unit Into location and fasten the wall bracket (7) to the wall anchor (6) with the screw (2).
Tighten the screw (1) that was not fully tightened in step 1
systembuild.com
UNIT MUST BE SECURE
TO INSTALL THE
injuries
tipover.
to
LLL
or
For Masonry, Concrete, or other wall materials:
may only
Consult your local hardware store for appropriate
the risk
anchors to securely
into a wall stud (preferred
into drywall
TO THE WALL TO
ANTI-TIPPING SAFETY
LLL
LLL LLL
attach the safety bracket.
method)
11
system
buildæ
HELP PREVENT TIPOVER.
BRACKET PROVIDED
Ø4X38mm
xl
FOLLOW
WITH THIS
Ø3 5X14mm
30X19X18XT1 5