LEGRAND 4 305 72 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Care and Cleaning
CAUTION: Turn off your MONITOR before cleaning.
You can clean the MONITOR as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help
assure adequate ventilation. The MONITOR's screen may be cleaned with a soft, lint-free cloth as well.
Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning do not spray liquid
directly on the screen, or allow liquid to run down the screen and inside the Monitor. Also, never place drinks or vases with water on top of
the monitor. This could increase the risk of fire or shock hazard or damage to the monitor.
To avoid the risk of glass breakage which may result in minor or moderate injury:
- Handle the monitor with care to avoid breaking the screen. The display contains glass parts to break.
- Do not place foreign objects on the monitor.
Mounting Your MONITOR to the Wall
CAUTION: The wall mount must bear a minimum of five times. The monitor's net weight without causing damage.
To mount your MONITOR to the wall you need to purchase a VESA wall mount (see Cat. No. 4 306 04).
1. You need to remove the base first before attaching the wall mount.
A. Place the MONITOR face down on a surface that is soft, yet strong enough to hold the MONITOR.
B. Use a screwdriver to remove the screws from the four holes on each side of the bottom of the MONITOR's base
(only use with base)
2. Make sure all cables are already connected to the MONITOR.
3. Follow the directions included with the wall mount to mount the monitor to the wall.
Specification
Model
Size
Resolution
Colors
Viewing Angle
Contrast Ratio
Response Time
Brightness
PIP / POP
Speakers
Composite Inputs
Composite Outputs
Audio
Auto Adjustment
Wall Hanging
OSD Language
Power Supply
Power consumption
OSD Control
Remote Control
Accessories
Dimensions
Weight
Operating Temp
Safety
Warning
- The installation and calibration must be carried out by highly skilled
personnel.
- Do not open there may be a risk of electric shock.
Use only for the following temperature conditions: from (-10) to (+55) °C.
Do not use with voltages different from the ones specified.
4 305 72
22"
473,76 x 296,1
H: 170º V: 160º
1000:1
5ms
300cd/m²
BNC x 2, VGA, S-video x 1, HDMI x 1
VESA Standard
English, Spanish, French, German, and Simplified Chinese, Portuguese, Russian
Input : 110 ~ 230V~
< 60 W
Power Cord, VGA Cable, Remote Control, User's Guide, and Audio Cable
511 x 315 x 60
6,5 Kg
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician.
Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific
mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by
the instructions. All Legrand products must be opened and repaired exclusively by personnel trained
and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and
the rights to replacement and guarantees.
Use only Legrand brand accessories.
4 305 73
1920x1080
16,7M
H: 176º V: 176º
450cd/m²
Yes
2 each (10 watts)
BNC x 2
RCA x 2 (L,R)
Yes
(See Cat. No. 4 306 04)
50/60Hz
Yes
Yes
769,8 x 529,8 x 277
0 °C - 55 °C
FCC-DOC, CE, RoHS
32"
4000:1
16ms
< 180 W
19 Kg

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

4 305 73

Table des Matières