Indicator Light; Navigating The Menus - Essentiel B 24 Pixel View Notice D'utilisation

Indicator light

Indicator light:
- blinks red when the screen is on standby
- blue when the screen is in operation

navigating the menus

Pivot the control button downwards after turning
Move the control button upwards or downwards
2.
3. Move the control button to the right to confirm the selected
Move the control button upwards or downwards
4.
Move the control button to the right to confirm.
5.
All changes are automatically saved.
Sub-menu Description
Menus
• Brightness • Adjust display brightness.
• Contrast • Adjust display contrast.
• Pre-settings • Set
brightness
standard
• Detect the distribution of input signals and create
• DCR
an optimized contrast. Pivot the control button to
the right to activate or deactivate the DCR function.
Display
• Adjust overdrive intensity depending on the use of
• Overdrive
the monitor.
• Automatically
• HDR
depending on the video source.
• Horizontal or • Manually
vertical position position
• Clock • Adjust the horizontal
• Map • Adjusting
Image Setup
• Ratio • Adjust the image ratio.
on the monitor:
to navigate the various menus.
menu or sub-menu.
to select a setting or change a value.
to Eco mode. Automatic contrast and
adjustment are enabled only when
mode is selected.
apply an optimal HDR effect
adjust the vertical (V) and horizontal (H)
of the image.
scanning frequency.
the phase of the image to reduce noise.