Samsung NK36R9600CS/AA Guide D'installation / Instructions D'emploi page 12

Range Hood Use
COOKTOP AND RANGE HOOD CONNECTIVITY
This appliance has a feature which allows you to pair compatible Samsung
cooktops and your hood via Bluetooth.
After you enable this function and pair your hood and a compatible
cooktop, the hood fan will automatically come on at Low speed when you
turn on a cooktop element. The hood fan will also shut off automatically
when you turn off the cooktop elements.
In addition, after the hood and compatible cooktop are paired, you can
download the Smart Things app to a mobile device, and then use the
Smart Things app to:
• Monitor and control the On/Off status of the hood.
• Monitor and control the fan speed.
•
Monitor and control the lights.
• Set the hood shut-off timer with the time-up alarm.
For more information about downloading the Smart Thing app to your
mobile device and using it to control your hood, visit:
www.samsung.com.
Bluetooth connection (Pairing)
1. Press the Auto Connectivity button on the hood for 3 seconds. The
pairing mode will be activated and the Bluetooth icon will blink.
2. Press the Auto Connectivity button on the cooktop.
NOTE
For a detailed description of the pairing method, see the user manual of a
compatible Samsung cooktop.
3. After the pairing process finishes, the Bluetooth light will stay lit and
appears in the display.
Bluetooth disconnection (pairing reset)
1. Press and hold the Auto Connectivity button and Light button on the
hood for 3 seconds.
2. The Bluetooth connection disconnects.
J. Auto Connectivity
The Auto Connectivity function lets you quickly connect the hood via
Bluetooth with a compatible Samsung cooktop after the hood and
cooktop have been paired. To turn the function on, press the Auto
Connectivity button. To turn the function off and disconnect the hood and
cooktop, press the Auto Connectivity button again.
While the hood and cooktop are connected, the hood fan will automatically
turn on when you turn on the cooktop.
The hood fan will also turn off automatically when you turn off the cooktop
You will also be able to control the hood with the Smart Things app as
described above.
Note that the hood fan speed will turn on at:
• Auto speed (if the Auto button was last enabled)
• Low speed (if the Auto button was last disabled)
12 English
1. Press the Auto Connectivity button to activate the function.
2. The hood will turn on/off automatically when you turn cooktop
elements on or off.
3. Press again to deactivate the function.
Remote Control
Image by Smart Things
App
O
O
NOTE
These functions are only available if you have installed a compatible
Samsung Bluetooth cooktop.
Reset the filter alarm
• Press the POWER button for 3 seconds to reset the filter alarm.
NOTE
Every 50 hours of fan use, the filter alarm light (low button) will blink,
indicating the filters may need to be cleaned.
CAUTION
• Do not activate the Boost function unless your hood's ventilation
system has been designed to handle the increased airflow created by
the Boost function and has been installed by a qualified technician.
We recommend that a qualified technician install the range hood.
It is the installer's responsibility to ensure the range hood complies
with the installation specifications for the product.
To activate Power mode, a professionally installed Make-up air
system is required.
Makeup Air
•
When using ventilation systems with greater than specified CFM of
air movement, review local building codes as they may require
makeup air systems. Consult a HVAC professional for specific
requirements for your area as CFM requirements can vary
between locales.
• Consult an HVAC professional to select the correct CFM capacity
range hood for your application. The CFM capacity depends on
the range or cooktop BTU rating, size and location, size of the
kitchen and the range hood ductwork in the kitchen.
Auto Hood
Connectivity Function
X O
O O