Télécharger Imprimer la page

SCS KA-SA02 Manuel D'installation Et D'utilisation page 8

Publicité

Les langues disponibles

Les langues disponibles

EN
AL Arm/ o ff/ ChimE sETTi ng s
• ALArm: it will be 10s time-delay if you turn
"off" to "ALArm", that is, it will not alarm
within 10s even if there is detection signal. it
will alarm quickly when you trigger it after 10s
The alarm time is 15s.
• off: the sensor doesn't work.
• ChimE: if you trigger it, it will give 2~3 times
dingdong" sound and then stop
automatically.
no te s
• Please don't hit the sensor and detection windows with hard or rough object
• Please don't install the sensor in the sunlight, raining and high humidity zone;
• Please don't install the sensor near heat or air current changed zone;
• Please take out the battery in order to avoid damaging the sensor if you don't
use it for long time;
• KA-sA02 is not formal alarm and it has limited alarm loudness, so it can call
attention to you only, but can't guarantee absolute safety. We don't
undertake any responsibility if happen any unexpected event.
Attention:
Before switching on battery, you should slide the switch to off position.
CHIME OFF AL ARM

Publicité

loading