System Build 5244013COM Instructions De Montage page 15

STEP 10
MPORTANT: THIS UNIT
HESE INSTRUCTIONS
)RODUCT
OPTION 1: Attachment
stud (preferred method)
Using a stud finder, locate a stud in
the wall. Place your unit against the
wall aligned In this location
To make driving the screw easier, you
can drill a 1/8" diameter Pilot hole
(3mm) into the stud.
Drive the screw (10) through the hole
of back panel into the wall stud.
OPTION 2: Attachment
Locate your unit where desired against
a wall then move your unit aside
Drill a 3/16" diameter hole (5mm) Into
the wallboard. Tap the wall anchor (9)
into the hole until It is flush
Move your unit into location and fasten
it to the wall anchor (9) with the screw
(10)
ameriwoodhome.com
MUST BE SECURE
TO INSTALL THE
into a wall
into drywall
TO THE WALL TO
ANTI-TIPPI G SAFETY
15
system
builde
HELP PREVENT TIPOVER.
BRACKET PROVIDED
WARNING
Serious or fatal crushing
can occur
To prevent
* Install tipover restraint provided
* place heaviest Items in the lowest
shelves
* Unless specifically designed to
accomodate,
heavy objects on the top of this
product
* Never allow
hang on drawers, door, or shelves
Use of tipover restarints
reduce, but not eliminate
of tipover
For Masonry, Concrete,
Consult your local hardware store for appropriate
anchors to securely attach the safety bracket
FOLLOW
WITH THIS
injuries
from furniture tipover.
tipover:
do not set TVs or other
children to climb or
may only
the risk
or other wall materials:
You
Tube